- Joined
- Jan 27, 2013
- Messages
- 52,470
- Reaction score
- 30,344
- Location
- Sydney, Australia ~ Shenzhen, China
- Country
- Australia
- Dash Cam
- Too many ¯\_(ツ)_/¯
How do you toggle it?
Sent from my SM-G950F using Tapatalk
press the MIC button
How do you toggle it?
Sent from my SM-G950F using Tapatalk
Haha. I should probably pay more attention to the buttons next time I'm in the car [emoji23]How do you toggle it?
Sent from my SM-G950F using Tapatalk
press the MIC button
Yes on start up. Using the card niko supplied
was this before or after the latest firmware update?
did you format the card after the last update?
This was using version 1.14 and I formatted the card after.
Ironically I am wanting to update to 1.18 but can’t because of this issue.
This was using version 1.14 and I formatted the card after.
Ironically I am wanting to update to 1.18 but can’t because of this issue.
so it's not loading the firmware?
Does it flashes constantly and never boots up a dashcam?This was using version 1.14 and I formatted the card after.
Ironically I am wanting to update to 1.18 but can’t because of this issue.
so it's not loading the firmware?
No not that, it’s not working with the current firmware (1.14). I haven’t tried the new firmware as the button just flashes so wanted to get this issue sorted first. What does the flashing mean?
Does it flashes constantly and never boots up a dashcam?This was using version 1.14 and I formatted the card after.
Ironically I am wanting to update to 1.18 but can’t because of this issue.
so it's not loading the firmware?
No not that, it’s not working with the current firmware (1.14). I haven’t tried the new firmware as the button just flashes so wanted to get this issue sorted first. What does the flashing mean?
Sent from my VKY-L29 using Tapatalk
It flashes constantly and the video image appears on the screen but it won’t record and none of the buttons won’t do anything.
It flashes constantly and the video image appears on the screen but it won’t record and none of the buttons won’t do anything.
if you power it on without the memory card in it can you then access the menu?
I have the camera set to 1 min files and screen off after 1 min also. All the other settings are pretty standard.
I’ve recorded the camera doing this behaviour, see this link...
https://drive.google.com/open?id=19vYOlTMKewHTV9HLcLXPD4xqpexqKq50
downloading now, did you reset defaults after doing the update, any changes to any of the menu default settings made after you updated?
I've watched the video now, turn motion detect off, the red light stopping indicates recording has paused, the little car icon on the display indicates you have motion detect turned on
I've watched the video now, turn motion detect off, the red light stopping indicates recording has paused, the little car icon on the display indicates you have motion detect turned on
Ok I’ll try that. You’ll have to bear with me until later as I’m at work for the next 8 hours or so now. Just for info, I didn’t touch the motion detection. Strange!
can you upload a sample video to a file host when you have a chance and send me a link so I can have a look
when you get a chance, I'm out of the country right now and have very patchy internet access, making the most of it while it's working right now