vvs49
Well-Known Member
- Joined
- Jan 8, 2015
- Messages
- 615
- Reaction score
- 793
- Country
- Ukraine
My auto monitor does not change the resolution of 1024 * 600 and that's it !!monitor to 640x480
My auto monitor does not change the resolution of 1024 * 600 and that's it !!monitor to 640x480
Where the maximum bitrate and 60 framesI am using only front without rear camera.
The A129 Parking Time Laspe Modes only work when 3-wire Hardwire power cable is connected to camera side port not the GPS mount. None of the Parking Time Lapse Modes work with Power Banks.Hello,
I have a problem with my 129 duo. It doesn't matter if I use the original firmware or a modified firmware. as soon as I set the parking mode to a time lapse like for example 1, 2 or 5 FPS the camera crash when starting the car and only works again after a restart.
What can i do?
suggest A129 MOD-5Ur or 6Ur or 7Ur for Medium Sharpness,Hi, which modified sw is the best for my new dashcam A129? I am using only front without rear camera. I prefer strong sharpness, the best details and high quality video.
untested solution = edit last firmware 640x480 display resolution entry to match your vehicle LCD panel 1024x600My auto monitor does not change the resolution of 1024 * 600 and that's it !!
The A129 Parking Time Laspe Modes only work when 3-wire Hardwire power cable is connected to camera side port not the GPS mount. None of the Parking Time Lapse Modes work with Power Banks.
I suspect the 3-wire kit isn't connected to correct fuse or weak ground. The Hardwire kit needs to sense voltage drop before Parking Time Lapse Mode will start. Try and TAP another fuse circuit and not one that shares keyless entry.Iam use the hardwire kit 3 and the powercable is already connected to the camera side port. The low bitrate parking mode works fine. All other parking modes don't work and crash
No, I certainly checkeduntested solution
If you're using MOD fw only low bitrate parking mode works, am I correct?Iam use the hardwire kit 3 and the powercable is already connected to the camera side port. The low bitrate parking mode works fine. All other parking modes don't work and crash
If you're using MOD fw only low bitrate parking mode works, am I correct?
After loading Stock or MOD-PKr Firmware always select Menu Default Settings to RESET all previous firmware values.I have try the 2-10fps parking modes with normal fw and a few mod firmwares always crash when I switch on the ignition. The lowbitrate parking mode works every times with all firmwares.
4K has twice as many pixels as "2K", so if 32Mb/s is perfect for 2K then we will want 32 x 2 = 64Mb/s for 4K32 Mb/s is the perfect level for 2K maximum detail, estimate 36 Mb/s for 4K max.
glad you said it first because that is exactly the MOD i'm testing first once the cam is in my hands, imagine 64 Mb/s and everyone is afraid to load 26 Mb/s . . . @gse and I will Alpha test these extremes.4K has twice as many pixels as "2K", so if 32Mb/s is perfect for 2K then we will want 32 x 2 = 64Mb/s for 4K
(Unless it is a Blackvue camera, they use 12Mb/s or 25 in extreme mode!)
I'm not sure that modding the Pro for higher bitrates than standard will be wiseglad you said it first because that is exactly the MOD i'm testing first once the cam is in my hands, imagine 64 Mb/s and everyone is afraid to load 26 Mb/s . . . @gse and I will Alpha test these extremes.
there's a reason 128 GB micoSD cards are marketed as 4K Ultra HD rated U3 write speed and probably required for my new 4K bitrate MODs.
Thread starter | Similar threads | Forum | Replies | Date |
---|---|---|---|---|
J | Viofo A129 Duo Parking Mode Problem - Please Help | A129 / 129 Duo | 11 | |
W | Saumsung MicroSD + Viofo A129 Duo | A129 / 129 Duo | 4 | |
Y | Installing VIOFO A129 DUO in 2018 Nissan Murano | A129 / 129 Duo | 4 | |
M | Viofo A129 Duo questions | A129 / 129 Duo | 4 | |
D | Viofo A129 Duo parking mode is bad | A129 / 129 Duo | 18 |