Wita Aldian
Member
if you have a 1.1.0 firmware is could be customized...
Oh Thanks Fried, please wait i still uploading the 1.1.0 firmware, i'll give u the link after its finish
if you have a 1.1.0 firmware is could be customized...
here you are...Hi @Fried,
here i finish uploading the 1.1.0 firmware thats for 22L
please check it https://drive.google.com/file/d/0B7jb9GUt2wlhVHlOWURjLVVKbjA/view?usp=sharing
thanks
here you are...
1.1.0 customized with 35 mpbs
https://drive.google.com/file/d/0BxO_QexYT9EAcnRQYU84ZmladVk/view?usp=sharing
it's couple of months that I'm using 64gb samsung microsd (bought from amazon it's orange card) without splitting issue (anyway I also used a 32gb chinese card earlier that works good aswell) for 35mbps bitrate it's not my choice but I simply take a look to test done by other users before me, and after make my test it seems that this bitrate has better quality/performance ratio possible.Why certain class 10 sd card fail to make 35mbps ? It should be way under spec.
And Fried why did you choose 35mbps ? And not 30 or 40 for example ?
BTW i'm running 1.2.3 with 35mbps, i have some split file but very rarely, i tried 40/45/50 by script but never manage to get more than 35.
I ordered a new sd card to test.
it's couple of months that I'm using 64gb samsung microsd (bought from amazon it's orange card) without splitting issue (anyway I also used a 32gb chinese card earlier that works good aswell) for 35mbps bitrate it's not my choice but I simply take a look to test done by other users before me, and after make my test it seems that this bitrate has better quality/performance ratio possible.
did you try to record something without app preview simply hitting shutter button and check on card if there's something?..oh thanks Fried, now i will download it, and i hope its will work for my cam
Edit :
i already try it to my camera its work, but my camera just still showing "System is busy" and not load any preview from lens, i have this problem before, so maybe something wrong with mycamera, but i think this custom firmware will work for another camera, thanks for create it Fried.
i just really confuse about my cam, everytime i instal other firmware than 1.1.0 its will bootlooping, but if i use 1.1.0 firmware its stop looping, but always have same problem like i said before, do u have any idea about this?
did you try to record something without app preview simply hitting shutter button and check on card if there's something?..
hi so i can download this and flash this to my camera and it will be upgraded with 35MPBS?here you are...
1.1.0 customized with 35 mpbs
https://drive.google.com/file/d/0BxO_QexYT9EAcnRQYU84ZmladVk/view?usp=sharing
for photo quality use script, this firmwares are made to get high bitrate by defaultAnyone can tell me what is all these custom firmware is?i had really no idea..if i want the best photo quality , which is the best firmware??
use firmware in the first post, this one is an old version that I'll deleted soon...hi so i can download this and flash this to my camera and it will be upgraded with 35MPBS?
- 2304x1296 is highest what sensor can do_ 24 fps video shoot at a high 16:9 resolution (1080p? 2,3K? Now I am reading that even 2560x1440p is possible?)
_ long continuous video shoots with larg file sizes (I am reading 2 GB is default, 4 GB is max?)
_ compression artefact reduction
_ bitrate that does not make the cam run hot (I read everything above 30 MBit/s heats the cam too much?) - do I need a microSD card above Class 10 for this?
_ mild noise reduction (I was reading that 1024 or 2048 gives best results?)
_ "flat" image (this is very important; I was reading online that you can brighten the dark areas and decrease saturation?)