Hi. I've just got my Yi upgraded to 1.5.12 and seems like the 1.5.6 scripts don't work.
Seems like nobody has written anything about 1.5.12 yet, so here I go.
What I was able to get from comparing the 1.5.6 and 1.5.12 firmwares was the following on 1.5.12 firmware (Z25L hw rev):
For 1080p60 40mbit, ABR, 0.75-1.25 range
writeb 0xC05CBEDC 0x05
writew 0xC05CBEE2 0x4220
writel 0xC05CBEB4 0x3f400000
writel 0xC05CBEB8 0x3fa00000
seems like the memory addresses have shifted a bit, 1.5.6 ones were
writeb 0xC05C8EDC 0x05
writew 0xC05C8EE2 0x4220
writel 0xC05C8EE4 0x3f400000
writel 0xC05C8EE8 0x3fa00000
I'm still wondering that the following line in the yimax script actually does since it's different in the 1080p60 and 1296p30 scripts (in the latter one the data written is 0x02):
writeb 0xC06D4426 0x03
anyone care explain what is the purpose of that line in the scripts?
Also it seems that the 4Gb filesize limit does not work. Will have to try and investigate that a bit further as well.
Seems like nobody has written anything about 1.5.12 yet, so here I go.
What I was able to get from comparing the 1.5.6 and 1.5.12 firmwares was the following on 1.5.12 firmware (Z25L hw rev):
For 1080p60 40mbit, ABR, 0.75-1.25 range
writeb 0xC05CBEDC 0x05
writew 0xC05CBEE2 0x4220
writel 0xC05CBEB4 0x3f400000
writel 0xC05CBEB8 0x3fa00000
seems like the memory addresses have shifted a bit, 1.5.6 ones were
writeb 0xC05C8EDC 0x05
writew 0xC05C8EE2 0x4220
writel 0xC05C8EE4 0x3f400000
writel 0xC05C8EE8 0x3fa00000
I'm still wondering that the following line in the yimax script actually does since it's different in the 1080p60 and 1296p30 scripts (in the latter one the data written is 0x02):
writeb 0xC06D4426 0x03
anyone care explain what is the purpose of that line in the scripts?
Also it seems that the 4Gb filesize limit does not work. Will have to try and investigate that a bit further as well.