FourEyes
Active Member
- Joined
- Feb 28, 2014
- Messages
- 237
- Reaction score
- 151
- Location
- Moscow
- Country
- Russian Federation
- Dash Cam
- Mio518,TV-Q5GPS,DEXP_EV-710,Pilot21DVR,GS2000,3xG1W,K6000
I haven't had the chance to use it because it died on me after a couple of days. When turned on manually LEDs were pretty good at distances around 10ft and that's about the only thing I could check.
Undo two screws on the back side of the sensor board and remove the holder, put it in a vise (don't tighten too hard) and use pliers through a piece of thick cloth on the lens top to break the bond. When putting the holder back double check that there are absolutely no dust specks on the sensor.
Undo two screws on the back side of the sensor board and remove the holder, put it in a vise (don't tighten too hard) and use pliers through a piece of thick cloth on the lens top to break the bond. When putting the holder back double check that there are absolutely no dust specks on the sensor.
Last edited: