Regarding Panorama X2 bracket / mount / holder ... compatibility of suction mount.
Prototype ( Korean version ) X2 has clear plastic bracket holder and bracket. Of course its up to idnividual taste, but myself I prefer black. Having Panorama 2 / S, I tried to swap clear to black.
Bracket holder is the same size as on Panorama 2 / S, so it is fully compatible with X2 and it is possible* to use same suction mount as used on Panorama S / 2 for those who want attach-detach dashcamera.
The only small issue comes to correspondence of
Cotter Pins and Fixed Vertical position
notches at the base sides of the pivot bracket mount to the notches on the Suction mount.
Below you see notches are on the right side of the original mount.
Suction mount notches are on the left side of bracket arm. So, in order to use a suction mount, you need to reverse a mount.
However ...
when reversing a mount ( no matter is it original X2 clear or black colour from s / 2 model ), - the mount pins are not matching main unit holes.
You may cut those mount pins, - this way you can mount bracket holder in reverse. This procedure is for suction mount use.