Multisoft
New Member
Hi, I hope this will be just as useful.
You can use commands via the file: usercfg.txt
List of commands (some commands are inactive):
You can use commands via the file: usercfg.txt
List of commands (some commands are inactive):
Code:
Contrast=0 ; -10....10
Saturation=0 ; -10....10
Sharpness=0 ; -10....10
Gamma=0 ; -10....10
StillSize=0 ;0~number of submenu - 1 [Min:0, Max:7]
StillQuality=0 ;0:Super fine, 1:fine [Min:0, Max:1]
StillFlash=2 ;OFF
SelfTimer=0 ;Self timer, 0 [Min:0, Max:2]
BurstShot=0 ;Continuous short: 0:OFF, 1:2 shots [Min:0, Max:3]
VideoSize=0 ;0:1080P@30, 1:720P@30, 2:720P@60, 3:VGA@30
VideoQuality=0 ;0:Super fine, 1:fine [Min:0, Max:1]
MicSensitivity=0 ;MIC sensitivity, 0:HIGH, 1:STANDARD [Min:0, Max:1]
VideoPreRecord=1 ;Video pre-record, 0:ON, 1:OFF [Min:0, Max:1]
VideoClipTime=1 ;Video clip time, 0:OFF 1:1min, 2:3min 3:5min, 4:10min [Min:0, Max:4]
VideoOffTime=1 ;0: Never 1:5sec, 2:1min, 3:5min, 4:30min, 5:60min[Min:0, Max:5]
RecordWithAudio=1 ;0:WITH, 1:WITHOUT [Min:0, Max:1]
Scene=0 ;0:AUTO, see this submenu for others [Min:0, Max:6]
EV=6 ;0:-2.0, 1:-1.66, 2:-1.33, 3:-1.00, 4:-0.66, 5:-0.33, 6:0, 7:+0.33, 8:+0.66, 9:+1.00, 10:+1.33, 11:+1,66, 12:+2.0 [Min:0, Max:12]
ISO=0 ;0:AUTO, 1:ISO-100, 2:ISO-200, 3:ISO-400 [Min:0, Max:3]
WB=0 ;1:AUTO, see this submenu for others [Min:0, Max:4]
Color=0 ;0:Natural, 1:Vidi, 2:Pale [Min:0, Max:2]
Effect=0 ;Effect:0:Normal [Min:0, Max:7]
SlideShow=0 ;0:Disable, 1:Enable [Min:0, Max:1]
SlideShowFileType=0 ;FileType:0:PHOTO and VIDEO, 1:PHOTO only, 2:VIDEO only [Min:0, Max:2]
REM SlideShowEffect=0 ;Effect:0:Simple, see this submenu for others [Min:0, Max:3]
REM SlideShowMusic=1 ;Music:0:On, 1:Off [Min:0, Max:1]
PlaybackVolume=10 ;Volume:0~9, 0 is Min, 9 is Max [Min:0, Max:10]
Beep=0 ;KeyBeep:0:On, 1:Off [Min:0, Max:1]
AutoPowerOff=0 ;Auto Power Off:0:Never, 1:30sec, 2:1min, 3:2min, 4:3min, 5:5min
;;DateTime=2012/12/17-11:45:00
Language=5 ;0~.., see language submenu list [Min:0, Max:5]
TVSYS=1 ;0:NTSC, 1:PAL [Min:0, Max:1]
HDMIOutput=0 ;0:1080, 1:720 [Min:0, Max:1]
Flicker=0 ;0:50Hz, 1:60Hz [Min:0, Max:1]
USB=0 ;0:MSDC, 1:PCCam [Min:0, Max:1]
LCDRotate=1 ;0:180deg, 1:0deg [Min:0, Max:1]
LCDPowerSaving=0 ;0:Nerver, 1:1min, 2:3min [Min:0, Max:2]
LEDFash=1 ;0:On, 1:Off [Min:0, Max:1]
GSensorSensitivity=1 ;0:Off, see this submenu for others [Min:0, Max:3]
GSensorPowerOnSens=2 ;0:Off, see this submenu for others [Min:0, Max:3]
TimeStamp=0 ;0:Time+Logo, 1:Time, 2:Logo, 3:None [Min:0, Max:3]
DateTimeFormat=3 ;0:NOT Display Date/Time, 1:YMD, 2:MDY, 3:DMY [Min:0, Max:3]
MotionSensitivity=0 ;0:Off, 1:Low, 2:Middle, 3:High [Min:0, Max:1]
MotionVideoTime=0 ;0:5sec, 1:10sec, 2:30sec, 3:1min [Min:0, Max:3]
MotionShot=0 ;0:1 shot, 1:2 shots, 2:3 shots, 3:5 shots [Min:0, Max:3]
TimeLapse=0 ;0~ see this submenu. [Min:0, Max:6]
AutoRec=0 ;0:On, 1:Off [Min:0, Max:1]
;;LoopRec=1 ;0:Off, 1:On
;;VideoTime=2 ;1~999 unit: Minute
TimeZone=26 ; GMT + 08:00
WiFi=0 ;0:On, 1:Off
GPSStamp=0 ;0:On, 1:Off
SpeedStamp=0 ;0:On, 1:Off
LDWS_EN=1 ;0:On, 1:Off
FCWS_EN=1 ;0:On, 1:Off
SAG_EN=1 ;0:On, 1:Off
HDR_EN=1 ;0:On, 1:Off
WNR_EN=0 ;0:Off, 1:On
Factory_Reset=1 ;0:user,1:Factory
FwDate=2016-09-09 ;
FirstRunBrowser=0 ;0:Not Show Warn,1:Show Warn
ApkMovingDetect=2 ;0:15min, 1:30min, 2:Forever
ApkSpeechSens=1 ;0:CLOSE, 1:HIGH, 2:LOW
;Keep This at last line
The 4pda Captcha consists of digits that are written in words. This alphabet will help you. At 4pda you can only communicate in Russian using the translator.4pda.ru
Install font and push html file