Jaspreet Singh
New Member
- Joined
- Feb 15, 2017
- Messages
- 11
- Reaction score
- 4
- Country
- India
Hi All,
I have a Viofo A119 with GPS which is about a month old. I have a strange issue, the camera suddenly displayed memory error.
After contacting support, i was told to re-flash the firmware 2.0 and reset the settings.
I tried that and it worked for a couple of hours before it again threw the same error. I have done this multiple times and each time camera starts working after firmware flash for a couple of hours.
I tried contacting Viofo support, but strangely no one is reverting for more than 10 days now.
Can someone help?
View attachment 29222
Below are some more details:
- I am using 32GB class 10 card
- i have hardwired the camera using a 12v accessories socket and by taking power directly from the fuse box. Which means i am plugging in the cable which came in the box into the new 12v socket and everything is tied under the dashboard, thus keeping my car's original 12v socket free. I am using the below socket under the dashboard.
View attachment 29223
View attachment 29223
Finally, the issue got resolved with the new card - Samsung 32Gb Evo+ Thanks for all help here!
However, there is another issue now. Since i have the gps module with the camera, the power is supplied to the gps module and camera clips on to it.
I have noticed that the camera screen keeps flickering and i also saw that the camera keeps restarting on its own. To me it looks like some lose connection between the camera and gps module. I also saw that the camera recordings get corrupt due to the frequent restarting of camera.
I tried taking out the camera from the gps mount and re inserted it and ensured it is locked properly, still same issue.
After this, i connected the power to the camera port directly and not the gps mount. Now, it works fine in this manner. Kindly help me how can i solve this issue? Is it the GPS module that is faulty or can it be the connectors on the camera itself?