Kremmen
Well-Known Member
- Joined
- Sep 14, 2017
- Messages
- 3,205
- Reaction score
- 1,730
- Location
- Reading
- Country
- United Kingdom
- Dash Cam
- 2 x Viofo A119 V3
Yes, I was just collecting the 60fps footage and didn't have a need for any freeze frame shots. The video looked smoother so I stuck with it. When I did need a freeze frame I found they all had motion blur.
Going back through my archive, all the 60fps suffered this and firmware 2.00 was worse than 1.03 even at 30fps.
The info I got was that whilst HDR has a On or Off setting it's more like low and high so never really off and that may be the motion blur issue. I think 1.03 didn't have HDR but had WDR and that was maybe fully off.
I now need to do some driving in good light to fully assess vvs against l.03. My first impression with vvs is that it maybe is a touch darker and I will set EV to + 1/3 for a test before testing 1.03 again.
I have lowered the angle very slightly as I think I'm showing too much sky.
This won't be quick but worth doing.
Going back through my archive, all the 60fps suffered this and firmware 2.00 was worse than 1.03 even at 30fps.
The info I got was that whilst HDR has a On or Off setting it's more like low and high so never really off and that may be the motion blur issue. I think 1.03 didn't have HDR but had WDR and that was maybe fully off.
I now need to do some driving in good light to fully assess vvs against l.03. My first impression with vvs is that it maybe is a touch darker and I will set EV to + 1/3 for a test before testing 1.03 again.
I have lowered the angle very slightly as I think I'm showing too much sky.
This won't be quick but worth doing.