I upload some boot_logo and shutdown_logo files.
You can find it on:
https://www.mediafire.com/folder/upm2r7ap6w5q6/Edit
I will update this folder with new logos later.
Good work. I chose the drone logos. However, I had to open and re-save jpg files with setting 100% compression, but not exceed 131072 bytes each file. A magnitude 5 to 10 sharpen operation on each jpg looks nice and increases the file size slightly but still under 131072. Original compression was 97 or 98. Used
Image > Information menu item in
IrfanView to get image file info.
Video of boot logo |
Video of shutdown logo
Here is a backup IMG for PhoenixSuite of my F60B Craine Sl603 camera, containing those drone photo boot/shutdown logos, but this time the front body is
yellow and firmware date in info screen is 201605
14V4.0 (as opposed to black front body and 02160515V4.0). I have two cameras now. ^_^
Also, I managed to change the camera's network name (SSID) and password in
HotShot app, under ⚙
Settings, WiFi-Info. Give new SSID, old password and new password. Then
Confirm. Then TURN OFF wifi on camera (up button). Wait 5 seconds. Turn on wifi again on camera. Joy! I suppose any letters/numbers up to fifteen maybe sixteen characters long will work. ^_^
Someday I gotta determine how to change my imx179.ko , libCedarX.so , libvideoresizer.so , and other run files in 2-system.img (rootfs?) from goprawn.com forums but without bricking the cam. ://
*EDIT* Some days ago I received a generic
"F60R" crane sl609 camera from ebay similar to F60B crane sl603 but with
wireless remote. Its factory firmware has motion detection feature for video only. So about 4 seconds of motion in %50 or more of the view usually triggers recording. Keep the camera motionless for a few seconds before you stop the recording; otherwise a new recording automagically starts.
To flash this firmware directly to another F60B crane camera, the 0-uboot.img should be patched by writing your camera's script.bin using Uberizer 1.8 (see other post in this thread). This firmware could
not be directly flashed to my F60B crane sl603 20160514 probably because lcd_driver or whatnot was wrong. So I put together a mix recipe firmware pack that will flash right (at least for me), along with drone boot/shutdown logos. In this filesystem, there are new files "awmd" under /system/lib and /system/res for the new feature. Note: when using motion detection, your screen will have a running-man icon, and video files may be delete-protected in menu and in \lock folder not in \video folder on sdcard and file names will have
_SOS after date_time. This happened on one but not all of my F60B(R) cameras.
download -
https://www.dropbox.com/s/g1mzbvtkvla68zn/F60B-mod-backup-crane_sl609.xiapc.20160913+20160514-lcd_ili9341-IMG-FEX.zip?dl=1
Also a user on goprawn has F60R firmware with motion detection but for beike imx179s 20160604. Try this if you have a beike board or try to make a recipe mix.
download -
https://www.dropbox.com/s/jng1xik56...ez_beike4k30imx179s.20160604_goprawn.rar?dl=1
Nice "addon" feature that maybe you can use? What do you think?