- Joined
- Nov 25, 2013
- Messages
- 3,086
- Reaction score
- 1,467
- Location
- Shenzhen
- Country
- China
- Dash Cam
- B1W/B2W/B2K/B4K/DV688/DV988/B1M/B2M
OkHi @estore009 - could you please send me details of this low bitrate firmware. much appreciated
OkHi @estore009 - could you please send me details of this low bitrate firmware. much appreciated
OkHello @estore009 , Can you send me link to low bit rate park mode with wifi off and on? thanks
Yes, please check your inbox message!Hi @estore009 , can i have the low bitrate firmware? Wifi off
Please download this low bitrate recording beta parking mode firmware hereHi @estore009 , can I have the low bitrate firmware? thanks. wifi on
Just ignore it!Since I installed that firmware I now have a CVBS option in the app
It is possible, and we need time to refine it!be nice when enters this low bitrate mode during parking that the led flashes slower so say every 5s or maybe flashes red and green etc
It takes recording 24 hour*7 days!In the low bitrate version, the dashcam is constantly recording to the SD card, even in parking mode? So if I leave my car parked for 8 hours I will have all 8 hours of video on my SD card when I come back to my car?
Yes, all 8 hours will be recorded with a low bit rate, this recording will take about 16-18 GB on the SD cardIn the low bitrate version, the dashcam is constantly recording to the SD card, even in parking mode? So if I leave my car parked for 8 hours I will have all 8 hours of video on my SD card when I come back to my car?
Yes, all 8 hours will be recorded with a low bit rate, this recording will take about 16-18 GB on the SD card
Even if we take the power consumed by one B1W - 2 watts (actually about 1.8 watts), then in 8 hours one dashcam will use 2W / 12V * 8h = 1.33 Ah, two B1W = 2.66 Ah. For a 55 Ah car battery, this will consume approximately 4.8% of the charge.That's great news! Thank you. I'm thinking about getting 2 of these - one for the front and one for the back of my car. Would hardwiring both separately be too much for the battery?
Even if we take the power consumed by one B1W - 2 watts (actually about 1.8 watts), then in 8 hours one dashcam will use 2W / 12V * 8h = 1.33 Ah, two B1W = 2.66 Ah. For a 55 Ah car battery, this will consume approximately 4.8% of the charge.
For more details, see page 1 post #7 in this thread https://dashcamtalk.com/forum/threads/b1w-low-bitrate-beta.38707/post-461912
Thread starter | Similar threads | Forum | Replies | Date |
---|---|---|---|---|
C | All Beta firmwares | B1W | 6 | |
E | Beta App Sound Problem | B1W | 7 | |
S | Low bitrate PM | B1W | 1 | |
V1.8.7 Android APP beta tester please | B1W | 56 | ||
B | Beta Parking | B1W | 0 |