Leonauto
Well-Known Member
- Joined
- Nov 11, 2013
- Messages
- 657
- Reaction score
- 893
- Location
- Smolensk
- Country
- Russian Federation
- Dash Cam
- Blueskysea, Viofo and etc
I checked the shooting with different camera tilt, and it turned out that our usual settings, where 30% of the sky, are not suitable for B2W. The cameras need to be positioned vertically, 50% of the sky is obtained, but in this case the front camera shoots with the correct exposure (it seems to me that this is provided for in the exposure metering table) and the interior camera shoots the interior, not the ceiling.
At the beginning of the video (firmware B2W-0726-E-02), the front camera is omitted below (as we are used to on other dashcams), and then I moved it to the correct position
raw video (71 MB) here : https://drive.google.com/open?id=1Sv5FcvmvOrNnQdYXH35tOHUo6YO7wW4Z
as well as the view from the rear camera in the cabin
At the beginning of the video (firmware B2W-0726-E-02), the front camera is omitted below (as we are used to on other dashcams), and then I moved it to the correct position
as well as the view from the rear camera in the cabin