I hardwired my M500 with the original UP03 hardwire kit and turn on parking mode. It turns out that the cam has a temperature all the time when parked. Does anyone here use M500 and turn on parking mode? Could you check yours for me? I just want to know whether it’s normal.
Hello all, new to this here. Thanks in advance for any suggestions.
Background info: We just got a new SUV (BMW X3). Currently, we live in the NYC area and park our car in an indoor public parking lot. So, recording when parking would be required. We will mostly use the car during the weekends...
I’ve hardwired my dash cam but for parking mode to work I need to turn the car off and on twice for parking mode to enter. If I just leave the dash cam with ignition off first time it just stops recording and camera just still got power. Anyone had any issues like this or any suggestions?
Thinking about running the PowerCell 8 to have parking mode on my new 139 Pro. I've never done parking mode before, and plan on getting the wiring that just plugs into the cigarette lighter outlet vs. hardwiring. I am currently using a SanDisk Max Endurance 256 GB card since the brand is on the...
My U3000 is plugged into the OBD of my 2023 Civic. I'm noticing it doesn't always switch to continuous recording mode if it is in the middle of recording an impact from when I enter the car (closing the door) or when it's recording in RADAR mode (when I walk in front of the car). Otherwise...
I am planning to install a 2ch dashcam in my Mazda CX-30.
I plan to hardwire the dash cam to car battery for parking mode. My question is:
- For any good parking mode dashcam, is the buffered parking mode must? I guess its then moat power saver mode.
- Will other modes like timelapse or low...
Hello everyone, I am new to the world of dashcams and seeking help to choose a dashcam that works for me.
I am looking to install a budget friendly dashcam in my Mazda CX-30. I am looking for buffered parking which I feel helps in case anything happens in parking lot when I am not around.
Can...
I have a VIOFO T130 and I had it hardwired, I want the parking mode feature, but it seems to keep the cam on Permanently. Is this how parking mode works?
I thought it would shut off and then just turn on if it detects motion or gets bumped.
The Viofo website says it does not, but I have an option in parking mode for auto-event detection. It seems to work as buffered parking mode, so what's the difference? Does the camera have buffered parking mode or not?
Hi all - so I recently installed my DR900X Plus and everything has been working great, but I have an annoyance.
When the camera goes into parking mode (voice announces it and light goes green), I get out of my vehicle, shut the door, and it instantly starts a locked “parking impact” event...
Hello everyone.
I'm new in the dash cam world and had the VIOFO A139 PRO 2CH installed and hardwired in my car by someone.
For some reason, regardless whether I turn off or on parking mode in the app, the camera is still on and recording even after turning off the car for a while. The...
hello all,
I'm new to hardwired parking mode.
My issue is that when there is a rain my dashcam records almost none stop, makes it not useful at all, while draining car battery.
I started from motion detected mode, but moved to impact / collision detection mode.
Even with collision detection...
My Nextbase 322gw has been installed by their fitters and is wired to a permanent live (apparently).
Auto turn off is On and parking mode is On.
The dash cam stays on ( all night!) after turning off the ignition and locking the car. This is bad for the card, camera and my car battery.
It...
I have a question about dash cam parking mode and whether it can be useful in my situation. I live in an apartment complex with underground parking. I have had two incidents where other vehicles hit my car while it was parked and one where it was vandalized while parked. I work from home and...
Hello all from Turkey.
I have bought A500s Dash Cam Pro Plus + by watching review videos. "Parking Surveillance" mode was active without hardware kit at all the reviews. This is the key feature for me to buy it. When I received it I noticed that "parking surveillance" mode was inactivated...
My b4k (installed with a hardware parking kit) records in the same way either driving or parking. But I want it to record in normal driving mode (without timelapes) while driving and in timelapse while parking. Is this possible? If yes How can I configure it to do so?
Hi All, I hardwired my Wolfbox T10 (I've confirmed that it's getting ACC power and BATT (always on) power) and it starts when I turn on ignition but the settings menu doesn't have anything about Parking Mode or Time Lapse recording (please see attached photo). When I turn off ignition, it powers...
My A129 Pro Duo with HK3 is working fine in normal mode. Event detection in parking mode leads to continuous recording, so I switched to time lapse for 12 hours. Some have stated on this forum that time lapse is only for the front cam. In the parking directory on the memory card I see the rear...
I got an E1 yesterday and I'm completely confused about how parking mode works. As best I can tell this camera does not work like most others which have a dedicated parking hardwire cable that detects when the car is turned off/on. My understanding is that this camera somehow automatically...
I connected my M300 with hardware kit and everything seemed fine. I was able to turn on parking mode and when i shut off car it says that it goes to parking mode in 5 minutes.
First night was ok, i checked the recordings in the morning and everything was ok.
Second morning, my car gave me...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.